Pump & HVAC System Accessories

110765 Bell & Gossett 1170-20 ASME Safety Relief Valve. Bell & Gossett 1" inlet and 1" outlet" Relief valve @ 20 PSI. Image is generic. This Item Usually Ships The Same Day!

110762 Bell & Gossett 790-110 ASME Safety Relief Valve. Bell & Gossett 3/4" inlet and 3/4" outlet" Relief valve @ 110 PSI. Image is generic. This Item Usually Ships The Same Day!

110760 Bell & Gossett 790-95 ASME Safety Relief Valve. Bell & Gossett 3/4" inlet and 3/4" outlet" Relief valve @ 95 PSI. Image is generic. This Item Usually Ships The Same Day!

Caleffi Z-One Z42 - Z111000 with auxiliary switch, 18 inch wire connection w/ Z200053 flare body. Caleffi Zone Valve Brochure  This Item Usually Ships Same Day!

109514 Bell & Gossett 1" SWT Snap Zone Valve Body SZV-100S-000 for Residential and Commercial HVAC Applications. Featuring an innovative compact design and an adapter ring that allows for the actuators to be installed in any 360-degree position,...

112471 Bell & Gossett 4" Primary Secondary Header. The B&G low-loss header, Model PSH, is a combination air separator and manifold that creates independent primary and secondary circuits. The B&G Model PSH is equipped with a purge valve...

Bell & Gossett A 2-1/2" Angle Pattern Flow Control Valve 107006. B&G Flo-Control Valves are used for preventing gravity flow in forced water systems and to permit summer-winter operation of indirect water heaters. This Item Usually...

SG-44 Armstrong Suction Guide 516860-021, 4"x4" flanged. Port Sizes (ins) System x Pump. Armstrong suction diffusers are designed for direct mounting on the suction flange of horizontal and vertical pumps. Armstrong Suction Guides (SG's) are...

570200-914 Armstrong FTV-14FS Flo-Trex Valve, Straight pattern valve. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak...

570200-383 Armstrong FTV-12FS Flo-Trex Valve, Straight pattern valve. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak...

570200-382 Armstrong FTV-10FS Flo-Trex Valve, Straight pattern valve. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak...

570200-381 Armstrong FTV-8FS Flo-Trex Valve, Straight pattern valve. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak efficiency...

570200-378 Armstrong FTV-4FS Flo-Trex Valve, Straight pattern valve. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak efficiency...

570200-378 Armstrong FTV-4FS Flo-Trex Valve, Straight pattern valve. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak efficiency...

570200-483 Armstrong Flo-Trex Valve FTV-12FA Angle Pattern. (Supplied with ANSI-125 FLANGED pump & system connections). Flange adapter kits not required. *Please note image is generic. Armstrong Flo-Trex Valves are used on the...

570200-482 Armstrong Flo-Trex Valve FTV-10FA Angle Pattern. (Supplied with ANSI-125 FLANGED pump & system connections). Flange adapter kits not required. *Please note image is generic. Armstrong Flo-Trex Valves are used on the...

570200-481 Armstrong Flo-Trex Valve FTV-8FA Angle Pattern. (Supplied with ANSI-125 FLANGED pump & system connections). Flange adapter kits not required. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge...

570200-480 Armstrong Flo-Trex Valve FTV-6FA Angle Pattern. (Supplied with ANSI-125 FLANGED pump & system connections). Flange adapter kits not required. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge...

570200-479 Armstrong Flo-Trex Valve FTV-5FA Angle Pattern. (Supplied with ANSI-125 FLANGED pump & system connections). Flange adapter kits not required. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge...

570200-478 Armstrong Flo-Trex Valve FTV-4FA Angle Pattern. (Supplied with ANSI-125 FLANGED pump & system connections). Flange adapter kits not required. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge...

570142-001 Armstrong FTST-2-1/2" Flo-Trex Valve Threaded Style Straight Pattern. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak...

570142-000 Armstrong FTST-2" Flo-Trex Valve Threaded Style Straight Pattern. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak...

570200-212 Armstrong FTV-1.2TS Flo-Trex Valve Threaded Style Straight Pattern. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak...

516837-304 Armstrong FSA 3" Flo-Trex Valve Straight Angle. Flanged outlet, screwed inlet. Flange is included. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and...

516837-303 Armstrong FSA 2-1/2" Flo-Trex Valve Straight Angle. Flanged outlet, screwed inlet. Flange is included. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage...

516837-302 Armstrong FSA 2" Flo-Trex Valve Straight Angle. Flanged outlet, screwed inlet. Flange is included. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and...

516837-301 Armstrong FSA 1-1/2" Flo-Trex Valve Straight Angle. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak efficiency...

570200-386 Armstrong Flo-Trex Valve FTV 2.5GS, 2-1/2". *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak efficiency. Flo-Trex...

115046 Bell & Gossett SDG-10 Suction Diffuser 10 IN Groove X 10 IN Flng. *Please note image is generic. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function at the...

115045 Bell & Gossett SDG-8 Suction Diffuser 8 IN Groove X 8 IN Flng. *Please note image is generic. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function at the most...

115044 Bell & Gossett SDG-6 Suction Diffuser 6 IN Groove X 6 IN Flng. *Please note image is generic. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function at the most...

115043 Bell & Gossett SDG-5 Suction Diffuser 5 IN Groove X 5 IN Flng. *Please note image is generic. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function at the most...

115042 Bell & Gossett SDG-4 Suction Diffuser 4 IN Groove X 4 IN Flng. *Please note image is generic. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function at the most...

115041 Bell & Gossett SDG-3 Suction Diffuser 3 IN Groove X 3 IN Flng. *Please note image is generic. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function at the most...

115040 Bell & Gossett SDG-2-1/2 Suction Diffuser 2.5 IN Groove X 2.5 IN Flng. *Please note image is generic. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function at...

SG-64 Armstrong Suction Guide 516860-023, Port Sizes (ins) System x Pump. Armstrong suction diffusers are designed for direct mounting on the suction flange of horizontal and vertical pumps. Armstrong Suction Guides (SGs) are installed on the...

115188 Bell & Gossett PL JH3Z Suction Diffuser 10x8 FLNG with SS internals. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function at the most optimum performance...

115189 Bell & Gossett PL JJ3Z Suction Diffuser 10x10. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function at the most optimum performance parameters. It conditions...

516837-304 Armstrong FSA 3" Flo-Trex Valve Flanged Straight Angle. Flanged outlet, screwed inlet. flange is included (Companion flanges are not included with any other Flo-Trex valves). *Please note image is generic. Armstrong Flo-Trex Valves are used on...

A91560 Bell & Gossett Suction Diffuser Steel Baffle. *Please note image is generic. This Item Usually Ships The Same Day!