Pump & HVAC System Accessories

110131 Bell & Gossett 1170-45 ASME Safety Relief Valve. Bell & Gossett 1" Relief valve set @ 45 PSI. This Item Usually Ships The Same Day!

A91285 Bell & Gossett Stainless Steel Strainer for SDG-6, GG-3, and HG-3 suction diffusers. This Item Usually Ships The Same Day!  

Bell & Gossett 2" Primary Secondary Header 112468. The B&G low-loss header, Model PSH, is a combination air separator and manifold that creates independent primary and secondary circuits. The B&G Model PSH is equipped with a purge valve...

570200-486 Armstrong Flo-Trex Valve FTV-2.5GA, Grooved Angle Pattern. (Supplied with GROOVED pump & system connections). *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to...

570200-218 Armstrong FTV-2TS Flo-Trex Valve Threaded Style Straight Pattern. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge side of pumping equipment to protect pumps from damage and keep them operating at peak...

SG-54 Armstrong Suction Guide 516860-022, Port Sizes (ins) System x Pump. Armstrong suction diffusers are designed for direct mounting on the suction flange of horizontal and vertical pumps. Armstrong Suction Guides (SG's) are installed on the...

Metraflex BSJC0200 2" Bronze Sweat Y Strainer 20. This Item Usually Ships The Same Day!

5003-C3 Taco Mixing Valve 3/4" Sweat Union Connections. This versatile Taco Series 5000 NSF 61 ASSE 1017 mixing valve provides the ultimate performance for domestic hot water installations. Information: Taco 5000 Series Lead-Free Mixing Valves...

V29400 Bell & Gossett Gasket. Please Contact Us For Lead Time!

A91559 Bell & Gossett Steel Baffle for FF-3 and GF-3 suction diffusers. This Item Usually Ships The Same Day! 

SD060040-5 Taco Suction Diffuser 6" x 4". Taco Rear Strainer Pullout (RSP) suction diffuser 6" system side and 4" pump side flanged connections. The Taco Suction Diffuser incorporates numerous features into one device that simplifies...

SD025025-5 Taco Suction Diffuser 2-1/2" x 2-1/2". Taco Rear Strainer Pullout (RSP) suction diffuser 2" system side and 1-1/2" pump side flanged connections. The Taco Suction Diffuser incorporates numerous features into one device that...

SD030020-5 Taco Suction Diffuser 3" x 2". Taco Rear Strainer Pullout (RSP) suction diffuser 2" system side and 1-1/2" pump side flanged connections. The Taco Suction Diffuser incorporates numerous features into one device that simplifies...

A9739 Armstrong Air Vent For "A, K and J" Series Steam Traps. This air vent is for use with all "A, K and J" Series Float & Thermostatic Steam Traps with 30 to 175 pound operating pressures. This Item Usually Ships The Same Day!

132137 Bell & Gossett 3D-8S Flanged Angle Pattern Triple Duty Valve. Please note this valve has to ship regular ground freight @ 320 pounds. Information: Bell & Gossett Triple Duty Valve Brochure Bell & Gossett Triple Duty Valve...

132152 Bell & Gossett 3DS-3G Grooved Triple Duty Valve. Information: Bell & Gossett Triple Duty Valve Brochure Bell & Gossett Triple Duty Valve Instruction Manual Bell & Gossett Triple Duty Valve Angle Straight Pattern Submittal...

115176 Bell & Gossett DC-3Z Suction Diffuser. System Side 3" flg, Pump side 2-1/2" flanged with ss internal. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the pumping system to function...

110758 Bell & Gossett 790-85 ASME Safety Relief Valve. Bell & Gossett 3/4" inlet and 3/4" outlet" Relief valve @ 85 PSI. Image is generic. This Item Usually Ships The Same Day!

110751 Bell & Gossett 790-25 ASME Safety Relief Valve. Bell & Gossett 3/4" inlet and 3/4" outlet" Relief valve @ 25 PSI. Image is generic. This Item Usually Ships The Same Day!

110085 Bell & Gossett 4100-45 ASME Safety Relief Valve. Bell & Gossett 2" inlet with 2" outlet ASME safety relief valve set @ 45 PSI. Image is generic. This Item Usually Ships The Same Day!

101241 Bell & Gossett 1.5" Isolation Flange Set Includes Two Flanges. This includes one pair of 1" NPT ball valves mounted on a pump flange. For Bell & Gossett NRF, NBF, and SSF wet rotors, Series PL-30, PL-36, and PL-55, Series...

Bell & Gossett 1" Primary Secondary Header Air Separator 112465. The B&G low-loss header, Model PSH, is a combination air separator and manifold that creates independent primary and secondary circuits. The B&G Model PSH is equipped...

107014 Bell & Gossett  S 2-1/2" Straight Pattern Flow Control Valve. Bell & Gossett Flo Control Valves are used for preventing gravity flow in forced water systems and to permit summer-winter operation of indirect water heaters. This...

570200-481 Armstrong Flo-Trex Valve FTV-8FA Angle Pattern. (Supplied with ANSI-125 FLANGED pump & system connections). Flange adapter kits not required. *Please note image is generic. Armstrong Flo-Trex Valves are used on the discharge...

V1001074 Bell & Gossett Baffle. *Please note image is generic. This Item Usually Ships The Same Day!  

V1001060 Bell & Gossett Baffle. *Please note image is generic. This Item Usually Ships The Same Day!  

A91561 Bell & Gossett Steel Baffle for HH-3X and JH-3X suction diffusers. This Item Usually Ships The Same Day! 

Metraflex BSN0100 1" 700BSN Check Valve Female. This Item Usually Ships The Same Day!

Sale Metraflex MSRCEE0500 5 IN CABLESPHERE EPDM TUBE/CV. This Item Usually Ships The Same Day!

22-AV Armstrong SS Air Vent 3/4" NPT 600 psi. The Armstrong all-stainless steel guided lever air vents have been developed to provide positive venting of air/gases under pressure. For pressures to 600 psig (41 bar) or specific gravity down to 0...

13-AV Armstrong SS Air Vent 1" NPT 45 psi. The Armstrong all-stainless steel guided lever air vents have been developed to provide positive venting of air/gases under pressure. For pressures to 600 psig (41 bar) or specific gravity down to 0.50...

115117 Bell & Gossett CC-3X Suction Diffuser Plus 2.5" x 2.5" Flanged. System Side 2.5", Pump Side 2.5" with NPT & Flanged Connections. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables...

115114 Bell & Gossett BB-3X Suction Diffuser Plus 2" x 2" Flanged. System Side 2", Pump Side 2" with NPT & Flanged Connections. The Bell & Gossett Suction Diffuser Plus is an angle pattern straightening fitting that enables the...

SD040030-5 Taco Suction Diffuser 4" x 3". Taco Rear Strainer Pullout (RSP) suction diffuser 4" system side and 3" pump side flanged connections. The Taco Suction Diffuser incorporates numerous features into one device that simplifies...

MPV 080-4 Taco Plus Two 8" Multi Purpose Valve. Size: 8" NPT, Connection: Flanged. Information: Taco Plus Two Multi Purpose Valve Brochure Taco Plus Two Multi Purpose Valve Instruction Sheet Taco Plus Two Multi Purpose Valve Parts List Taco...

MPV 025-4 Taco Plus Two Multi Purpose Valve. Size: 2-1/2" NPT, Connection: Threaded. Information: Taco Plus Two Multi Purpose Valve Brochure Taco Plus Two Multi Purpose Valve Instruction Sheet Taco Plus Two Multi Purpose Valve Parts List Taco...

101237LF Bell & Gossett 1" Sweat Check-Trol Isolation Flange. The Bell & Gossett Check-Trol flange is a combination of isolation valve, flow control valve, and companion flange for circulators. The ball valve allows the circulator to be removed...

132128 Bell & Gossett 3DS-10S Flanged straight pattern Triple Duty Valve. Please note this has to ship regular ground freight @ 458 pounds. Information: Bell & Gossett Triple Duty Valve Brochure Bell & Gossett Triple Duty Valve...

113041 Bell & Gossett DT-2 Drain-O Tank Air Charger. DT-2 DRAIN-O-TANK® AIR CHARGER - The Drain-O-Tank Air Charger offers a sure, quick way to recharge a water-logged compression tank.  This Item Usually Ships The Same Day!

110767 Bell & Gossett 1170-40 ASME Safety Relief Valve. Bell & Gossett 1" inlet and 1" outlet" Relief valve @ 40 PSI. Image is generic. This Item Usually Ships The Same Day!