Astro 2 HWR With Timer & Line Cord
The Armstrong Astro 2 hot water re-circulation system automatically circulates water through domestic water pipes. This ensures that hot water is available instantly at every tap throughout a residence. From a cost and environmental point of view, far less water is wasted each time a hot water faucet is opened – saving an average of 12,000 gallons of water annually for a typical four-person household. Ideal for retrofit applications.
- Armstrong Astro 2 Hot Water Re-Circulating Pump Brochure
- Armstrong Astro 2 Hot Water Re-Circulating Operating Instructions
- Armstrong Astro 2 Hot Water Re-Circulating Pump Submittal Sheet
- Armstrong Astro 2 Aquastat Control Instructions
- Stainless stell circulating pump
- 6 feet line cord
Heated water cools rapidly in domestic hot water distribution pipes, even when properly insulated. When hot water is desired, the common practice is to run cooled water down the drain until hot water reaches the tap. A typical family of four can waste over 90 hours and 12,000 gallons of sanitized water per year while waiting for hot water at the tap.
Armstrong Astro 2 Hot Water Re-circulation systems automatically circulate water through domestic hot water distribution pipes. This helps to ensure that everyone in the household has ‘instant’ hot water at the tap when they need it, while also helping to conserve water and save water heating energy costs. Models equipped with an aquastat save even more energy.
Power connection: 6.0 ft (1.8 m) power cord, molded duplex plug with ground
Environment: Indoor use only
Max. working pressure: 150 psi (1034 kPa)
Ambient temperature: 39°f(4°c) to 104°f(40°c)
Max. water temperature: 230°f (110°c)
Low temperature switchpoint1: 85°f(29°c) ± 10%
High temperature switchpoint1: 105°f(40°c) ± 10% Clock/timer: 12 hour analog clock with am/pm indication
Timer settings: Individual mechanical toggle for each 15 minute
interval in the 24 hour cycle
Manual override: Three position slide switch; on/auto/off
If you have any questions please give us a call at 1-800-781-7405 or email us your request. Sales@NationalPumpSupply.com