Custom Built Pumps

Please note the Bell & Gossett 1510 Pump is custom built. We need the information from your current pump to size properly so please contact us. Bell & Gossett Series 1510 Pump 1-1/4 AC 2HP. Bell & Gossett Series 1510 pump is like no...

172648LF Bell Gossett Series 60 Pump Less Volute. THIS ITEM USUALLY SHIPS THE SAME DAY!

Bell & Gossett e-1510 1.25AD 1 HP 1750 RPM 3 Phase TEFC Pump. This pump features a 1-1/2" NPT end suction and a 1-1/4" NPT top discharge. B&G e-1510 Technical Brochure B&G e-1510 Installation, Operation and Maintenance Manual B&G...

Please note the Bell & Gossett 1510 Pump is custom built. We need the information from your current pump to size properly so please contact us. Bell & Gossett 1510 4BC Pump With 125 HP 3550 RPM Motor. Bell and Gossett Base-mounted,...

Please note the Bell & Gossett 1510 Pump is custom built. We need the information from your current pump to size properly so please contact us. Bell & Gossett 1510 2AC Pump With 3 HP 1800 RPM Motor. Base-mounted, end-suction Series 1510...

Bell & Gossett Series e-80 5HP 1750/3/60 184JM Pump Model 4 x 4 x 7B with Premium Efficient ODP Motor Pump. ***Please note GPM and FT, plus exact operating voltage and phase requirements must be specified at time of order. ANSI...

1050-2B Armstrong Circulating Pump 3/4 HP 1 Phase, 2" inlet and 2" outlet. The Armstrong 1050/1060 circulators serve residential and light commercial systems that require higher flow and pressure. 1050/1060 circulators also offer the flexibility of...

1050-1B Armstrong Circulating Pump 1/4 HP 1 Phase. The Armstrong 1050/1060 circulators serve residential and light commercial systems that require higher flow and pressure. 1050/1060 circulators also offer the flexibility of customizing the flow...

4380 Armstrong 10HP ODP Close Coupled Vertical In-Line Pump 4x4x6, 460V/3/60 FRAME 213JM PUMP SIZE 4 X 4 X 6, Bronze Impeller, Shaft Sleeve 316 SS. 4” suction, 4” discharge companion flanges and gaskets supplied by others. You must...

4AD Bell & Gossett e-1510 5 HP 3 Phase TEFC Pump. This pump features a 5" NPT end suction and a 4" NPT top discharge. ANSI 5” suction, 4” discharge companion flanges and gaskets supplied by others. Information: B&G e-1510...

FI-1209C Taco FI Series 2HP End Suction Centrifugal Pump. Horizontal Frame-Mounted Rear Pull-Out End Suction Centrifugal Pump with 1.5" x 1.25" Flanged Connections. ANSI Class 125 Flanges w/o Wear Ring, Ceramic Seat, Carbon Rotor, EPT Rubber, 250...

Bell & Gossett e-1510 1.5BC Pump 5 HP 1750 RPM 3 Phase ODP with 9.5" impeller. This pump features a 2" NPT end suction and a 1-1/2" NPT top discharge. B&G e-1510 Technical Brochure B&G e-1510 Installation, Operation and Maintenance...

Bell & Gossett e-1510 1.5BC Pump 1-1/2 HP 1750 RPM 3 Phase TEFC. This pump features a 2" NPT end suction and a 1-1/2" NPT top discharge. B&G e-1510 Technical Brochure B&G e-1510 Installation, Operation and Maintenance Manual B&G...

Please note the Bell & Gossett 1510 Pump is custom built. We need the information from your current pump to size properly so please contact us. Bell & Gossett 1510 2-1/2AB Pump With 5 HP 1800 RPM Motor. Base-mounted, end-suction Series 1510...

Please note the Bell & Gossett 1510 Pump is custom built. We need the information from your current pump to size properly so please contact us. Bell & Gossett 1510 1-1/2BC Pump With 7-1/2 HP 1800 RPM Motor. Base-mounted, end-suction Series...

Please note the Bell & Gossett 1510 Pump is custom built. We need the information from your current pump to size properly so please contact us. Bell & Gossett 1510 2BC Pump With 60 HP Motor. Base-mounted, end-suction Series 1510...

3GB Bell & Gossett e-1510 25HP Base Mounted End Suction Pump, SS, 25HP 1800 Baldor, TEFC, Nema Premium Efficient, 230/460/3/60 Motor, 284T Frame, 12.25" Impeller, EPR/SiC/SiC/SS Seal. This pump features a 4" end suction & 3" top discharge...

FI-4007 Taco FI Series Frame-Mounted End Suction Centrifugal Pump. FI Series Frame Mounted End Suction Pump, 5 " (127) mm Suction, 4 " (102) mm Discharge, 7 1/4 " Nominal Imp Dia, 1750 RPM, ODP, 7 1/2 HP, Starting Option = Across the Line,...

4GC Bell & Gossett e-1510 40 HP 1800 RPM, TEFC, 324T Frame, with 12.5" Impeller, STDBuna/Carbon/Ceramic/SS/Bronze Seal, BG Choice, TEFC, Nema Premium Efficient, 208-230/460/3/60 Motor. This pump features a 5" NPT end suction and a 4" NPT...

4380 Armstrong 20HP ODP Motor, 3560RPM, Close Coupled Vertical In-Line Pump 4x4x6, 208/3/60 FRAME 254JM PUMP SIZE 4 X 4 X 6, Bronze Impeller, Shaft Sleeve 316 SS. 4” suction, 4” discharge companion flanges and gaskets supplied by others...

FI3007 Taco FI Series Pump 5 HP 1750 RPM 3PH ODP Motor. Taco FI Series Frame Mounted End Suction Pump, 4 " (102) mm Suction, 3 " (76) mm Discharge, 7 1/2" Nominal Imp Diameter, 1750 RPM, ODP, 5 HP, Starting Option = Across the Line, 230/460/60/3...

FI4011 Taco FI Series Frame-Mounted End Suction Centrifugal Pump 25HP, 5 " (127) mm Suction, 4 " (102) mm Discharge, 11 " Nominal Imp Dia, 1750 RPM, ODP, 25 HP, Starting Option = Across the Line, 230/460/60/3 Usable At 208, 40 Deg C Ambient/NEMA STD...

FI5013 Taco Frame-Mounted End Suction Centrifugal Pump, 6 " (152) mm Suction, 5 " (127) mm Discharge, 13 1/2 " Nominal Imp Dia, 1750 RPM, ODP, 50 HP, Starting Option = Across the Line, 230/460/60/3 Usable At 208, 40 Deg C Ambient/NEMA STD./CCW...

TA1224 Taco TA Series Centrifugal Pump Wet End Only. Be sure to specify Left Hand or Right Hand rotation requirement when placing an order. Note: ANSI 6” suction, 5” discharge companion flanges and gaskets supplied by others. Taco...

Taco TC050308 TC Series Vertical Split Case Centrifugal Pump. Taco TC Vertical Split Case Pump, 5" (125) mm Suct, 3" (80) mm Disch, 8" Nom Imp Dia, 1750 RPM (4 Pole), ODP, 10 HP, Starting Option = Across the Line, 230/460/60/3 Usable At 208, 40 Deg...

Taco TC060410 TC Series Vertical Split Case Centrifugal Pump. 6" (150) mm Suct, 4" (100) mm Disch, 10" Nom Imp Dia, 1750 RPM (4 Pole), ODP, 30 HP, Starting Option = Across the Line, 230/460/60/3 Usable At 208, 40 Deg C Ambient/NEMA STD./CCW (Std),...

1.25BC Bell & Gossett e-1510 Pump 3 HP ODP Motor 1800 RPM 3 Phase. This pump features a 1-1/2" suction and a 1-1/4" discharge. Information: B&G e-1510 Technical Brochure B&G e-1510 Installation, Operation and Maintenance...

1.25BC Bell & Gossett e-1510 Pump 5 HP ODP Motor 1800 RPM 3 Phase. This pump features a 1-1/2" suction and a 1-1/4" discharge. Information: B&G e-1510 Technical Brochure B&G e-1510 Installation, Operation and Maintenance...

Armstrong 4030 Series Horizontal Base Mounted Pump 50 HP 4 x 3 x 10. You will need to specify the exact motor electrical operating voltage requirement at time of order. ANSI 3” suction, 1.5” discharge companion flanges and gaskets...

Armstrong 4030 Series Horizontal Base Mounted Pump 20 HP 4 x 3 x 11.5. You will need to specify the exact motor electrical operating voltage requirement at time of order. ANSI 3” suction, 1.5” discharge companion flanges and gaskets...

KS1509 Taco KS Series Vertical In-Line Pump with Split Coupling 3HP. KS Series Vertical In-Line Pump with Split Coupling, 1 1/2 " (38) mm Suction, 1 1/2 " (38) mm Discharge, 9 " Nominal Imp Dia, 1750 RPM, TEFC, 3 HP, Starting Option = Across the...

VSX-VSC Bell & Gossett Vertical Split Case Pump Model 4x6x10-1/2A, rated for 750 GPM, 110’ TDH, 10.5” Impeller, LHR, 40HP 1780/3/60 ODP 284T EPACT NEMA Premium Efficient Motor, Flush Line, Unitized EPR/SiC/SiC (175 PSI - 300°F)...

2BD Bell & Gossett e-1510 5 HP 3 Phase ODP Pump. This pump features a 3" NPT end suction and a 2-1/2" NPT top discharge. You must specify your exact motor electrical operating voltage requirement at time of order.  ANSI 3”...

4300-12x12x17 Armstrong Split Coupled Vertical In-Line Pump 100 HP Motor. Armstrong 4300 Vertical In-Line Pumps Are Built To Order. Please provide us pictures of the data plate if available and all the specs on your current pump...

FI-2508 Taco FI Series Pump FI2508E4EAJ1L0AB1916D, 2 HP, 1150 RPM, 3PH TEFC, 230/460/60/3 TEFC, Baldor Super E Premium Efficient Motor with Aegis Shaft Grounding. 3" x 2-1/2" Flanged Connections. Starting Option = Across the Line, 230/460/60/3...

Armstrong Model 4030-6x5x11.5 30hp Base Mounted Pump. You will need to specify the exact motor electrical operating voltage requirement at time of order. ANSI 6” suction, 5” discharge companion flanges and gaskets supplied by others...

6G Bell & Gossett Base Mounted Pump Series e-1510 with 20HP, 1150/3/60 286T, ODP Premium Efficient, EPR/SiC/SiC/SS Seal, Stainless Steel Impeller. We furnish Baldor Electric and WEG motors that meet current EPACT NEMA premium efficiency...

6G Bell & Gossett e-1510 60HP 3 Phase ODP Pump with 60HP 1750/3/60 364T ODP Premium Efficient, EPR/SiC/SiC/SS Seal, Stainless Steel Impeller. We furnish Baldor Electric and WEG motors that meet current EPACT NEMA premium efficiency electrical...

3AD Bell & Gossett Series e-1531 Pump 25HP 3550/3/60 256JP ODP motor, EPR/SiC/SiC Seal. We furnish Baldor Electric and WEG motors that meet current EPACT NEMA premium efficiency electrical standards. ANSI 4” suction, 3”...

4380 Armstrong 15HP Close Coupled Vertical In-Line Pump 6x6x10. The Armstrong 4380 Vertical In-Line Pumps are the high-quality pipe-mounted pumps, made up of cast iron, ductile iron, or bronze casing, that are specifically designed for...