80-DC Series Differential Condensate Controllers
Armstrong 80-DC Series Automatic Differential Condensate Controllers.
CAST IRON/HORIZONTAL. For pressures to 250 psig (17 bar) . . . Capacities to 20, 000 lb/hr (9072 kg/hr).
Information:
- Armstrong 80-DC Series Automatic Differential Condensate Controllers Product Literature
- Armstrong 80-DC Series Automatic Differential Condensate Controllers Installation & Maintenance Instructions
- Armstrong 80-DC Series Automatic Differential Condensate Controllers Submittal Sheet
Armstrong automatic differential condensate controllers (DC) are designed to function on applications where condensate must be lifted from a drain point or in gravity drainage applications where increased velocity will aid in condensate drainage.
When lifting from the drain point, often referred to as siphon drainage, the reduction in pressure that occurs when the condensate is elevated causes a portion of it to flash back into steam.
Ordinary steam traps, unable to differentiate between flash steam and live steam, close and impede drainage. Increased velocity with gravity drainage will aid in drawing the condensate and air to the DC.
This increased velocity is caused by an internal bypass, controlled by a manual metering valve, so the condensate controller will automatically vent the bypass or secondary steam. This steam is then directed to the condensate return line or collected for use in other heat exchangers.
If you have any questions please give us a call at 1-800-781-7405 or email us your request. Sales@NationalPumpSupply.com.
