Bell & Gossett

1EF028LF Bell & Gossett Be610S Bronze Series e-60 Pump 1/2 HP

(No reviews yet) Write a Review
MPN:
1EF028LF
Condition:
New
Availability:
This Item Usually Ships The Same Day!
Weight:
79.00 LBS
Shipping:
$285.00 (Fixed Shipping Cost)
$3,921.95

Description

1EF028LF Bell & Gossett Be610S Bronze Series e-60 Pump 1/2 HP Single Phase 115/230v motor, All Bronze Construction. Pump Size 2x2x5.25. The Bell & Gossett Series e-60 is a three-piece centrifugal in-line pump designed for HVAC, potable water, and other clean water applications in the residential and commercial markets. Series e-60 offers great value with class-leading hydraulic efficiency, long pump life, and easy serviceability. Quiet operation, a robust mechanical seal, and maintenance-free bearings make Series e-60 a truly worry-free, install-and-forget solution.

Information:

Ease of Selection: Series e-60 pumps come in 9 sizes, with 144 available stock models and many more Built-to-Order configurations. Both stock and BTO pumps are easily selectable using B&G pump selection and e-order software. 

Simple, Versatile Installation: The Series e-60 mounts directly to system piping by its bolted flange connections, offering design flexibility and saving valuable floor space. As a replacement pump, the Series e-60 is a perfect drop-in solution, as flange- to-flange and intake/suction dimensions are identical to equivalent legacy Series 60 models — and even some competitors’ pumps. 

Robust Design: The Series e-60 employs high quality components for smooth performance and long pump life. The pumps permanently lubricated rotating bearings come fully enclosed in Polyrex grease for true maintenance-free operation. The unitized mechanical seal offers better performance and longer life. 

Ease of Service: Three-piece design allows for minimally invasive service. The motor, coupler, seal and impeller can all be repaired or replaced without removing the pump from its piping. The one-piece seal simplifies seal replacement, eliminating the clumsy task of assembling difficult seal components to the shaft. 

Series e-60 ECM:

• Variable Speeds from 300-1725 RPM
• On-board dial for manual speed control
• 0-10V DC signal input for automatic control
• Quieter operation than standard induction motors • ECM up to 82% efficient at constant speed
• Click Here For More Information On The Bell & Gossett Series e-60 ECM Centrifugal Pumps

THIS ITEM USUALLY SHIPS THE SAME DAY!

View AllClose

Warranty Information

For items provided by National Pump Supply, but manufacture by others, National Pump Supply extends the manufacturer’s warranty to the Buyer. Warranty requires install, start-up and operation as per manufacturers IOM. If the deliverables do not conform to the above applicable warranty, and if the Buyer promptly notifies National Pump Supply, National Pump Supply shall thereupon, if it confirms the existence of the defects, correct defects, including non-conformance with the specification, either (at National Pump Supply’s option) by repairing at no charge to Buyer the defective spare part or equipment furnished hereunder, or by making available at the Buyer’s location necessary replacement products. THIS LIMITED WARRANTY DOES NOT COVER LOSS OR DAMAGE WHICH: (I) IS DUE TO IMPROPER INSTALLATION, MAINTENANCE, MISUSE, NEGLECT, OR ANY CAUSE OTHER THAN ORDINARY COMMERCIAL OR INDUSTRIAL APPLICATION BY BUYER OR ITS CUSTOMER OR CONTRACTORS; (II) IS DUE TO ADJUSTMENT, REPAIR OR MODIFICATION BY ANY PERSON OTHER THAN AS AUTHORIZED BY NATIONAL PUMP SUPPLY OR MANUFACTURER; OR, (III) IS DUE TO STORAGE OR USE IN AN IMPROPER ENVIRONMENT, EXCESSIVE OR INADEQUATE HEATING OR AIR CONDITIONING, AND ELECTRICAL POWER FAILURES, SURGES OR OTHER IRREGULARITIES WHILE IN THE CUSTODY OR CONTROL OF BUYER OR ITS CUSTOMER OR CONTRACTORS. NATIONAL PUMP SUPPLY IS NOT RESPONSIBLE FOR PROBLEMS CAUSED BY HARDWARE OR COMPUTER OPERATING SYSTEMS WHICH ARE NOT COMPATIBLE WITH THE SYSTEM SPECIFICATIONS AS SET FORTH IN NATIONAL PUMP SUPPLY'S TECHNICAL DOCUMENTATION. NATIONAL PUMP SUPPLY SHALL HAVE NO LIABILITY WITH RESPECT TO DELIVERABLES THAT WERE SUBJECTED TO ABUSE, VANDALISM OR MISUSE. THE WARRANTY SET FORTH HEREIN IS THE SOLE AND EXCLUSIVE WARRANTY, IN LIEU OF ALL OTHER WARRANTIES, AND NO OTHER WARRANTIES OF ANY KIND SHALL APPLY, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND FREEDOM FROM THIRD PARTY INFRINGEMENT CLAIMS.
View AllClose

Additional Information

Manufacturer:
Bell & Gossett
Series:
e-60
Model:
Be610S
Construction:
All Bronze
Part Number:
1EF028LF
Pump Size:
2 x 2 x 5.25
Impeller Diameter (in):
4.125
Motor HP:
1/2 ODP
RPM:
1750
Phase:
Single 115/230v
Working Pressure:
175 PSI Max
View AllClose

Related Products

Related Products